DuttonOwners

Dutton Kit Cars and their owners

Photo (poor) of baffled sump added. Any suggestions about removing the return tube from the oil pump to the sump? It's a press fit and I would rather take it out before taking block for a rebore.

Views: 68

Attachments:

Reply to This

Replies to This Discussion

Crank and block now at Bradbury Engineering - I'm optimistic they seem to know there stuff. Good range of machine tools and engines in process. They specialise in older engines! Including pre war motors where they can re make (cast and machine) new white metal bearings. Looks like my crank is recoverable - but might be on its last regrind. Block will be machined to suit Burtons +0.110" pistons as it's currently on +0.090".

RSS

© 2017   Created by Tim Walker (The Bodger).   Powered by

Report an Issue  |  Terms of Service