Melos front end refurb - DuttonOwners2024-03-28T20:45:23Zhttp://duttonowners.ning.com/forum/topics/melos-front-end-refurb?feed=yes&xn_auth=noYour uppers are indeed triump…tag:duttonowners.ning.com,2019-01-27:2398922:Comment:2483592019-01-27T16:52:46.356ZAdrian Southgatehttp://duttonowners.ning.com/profile/AdrianSouthgate
<p>Your uppers are indeed triumph and that is a combination i've not seen before. Most later ones use the dutton upper wishbones.</p>
<p>Good job, looking tidy.</p>
<p>Your uppers are indeed triumph and that is a combination i've not seen before. Most later ones use the dutton upper wishbones.</p>
<p>Good job, looking tidy.</p> nice hybrid set up I have not…tag:duttonowners.ning.com,2019-01-27:2398922:Comment:2482602019-01-27T16:22:40.335ZSteve Kerswellhttp://duttonowners.ning.com/profile/steveKerswell
<p>nice hybrid set up I have not seen before. Good work</p>
<p>nice hybrid set up I have not seen before. Good work</p> Thanks Daryl,
Next job is to…tag:duttonowners.ning.com,2019-01-27:2398922:Comment:2481862019-01-27T08:18:31.582ZPaulhttp://duttonowners.ning.com/profile/Paul
<p>Thanks Daryl,</p>
<p>Next job is to re-engineer the gearbox to chassis mount and get some strength back in the chassis where the previous owner has just cut away tubing. Then I can drop the body back down off the 4" separation blocks I have wedged in.</p>
<p>Thanks Daryl,</p>
<p>Next job is to re-engineer the gearbox to chassis mount and get some strength back in the chassis where the previous owner has just cut away tubing. Then I can drop the body back down off the 4" separation blocks I have wedged in.</p>