Dutton Kit Cars and their owners

Started fairly easily but due to a couple of issues one minor the other major  it was stopped very quickly ,Issue one is the fuel pressure which is very low at around 2 psi when it should be 3-4 psi , fuel line ,pump regulator and gauge are all new , they are all Sytec stuff  . The other one is serious , no frigging oil pressure from a new pump which has been primed twice but nothing showing on 3 different gauges ,so its sump off to fit another new pump ,great!!

Views: 30

Reply to This

Replies to This Discussion

Hi Daryl, I know this sounds a bit obvious but you did put the hexagonal oil pump drive in didn't you.

Yes BV without any doubt


© 2018   Created by Tim Walker (The Bodger).   Powered by

Report an Issue  |  Terms of Service