DuttonOwners

Dutton Kit Cars and their owners

Rating:
  • Currently 0/5 stars.

Views: 101

Add a Comment

You need to be a member of DuttonOwners to add comments!

Join DuttonOwners

Comment by Liam Bourne on April 26, 2017 at 7:50

I rebuilt the engine early last year so thought as it's done about a 1000 or so miles I'll just check the preload of the tappets to ensure everything has settled in and all is well. I have a fast road cam and rhoads lifters so it always sounds very lumpy and 'tappety' on tick over so it never sounds the smoothest until it gets going. The engine has big valve heads which i've also ported, ported Edelbrock inlet manifold, crower 50232 cam (needs bigger one!), Edelbrock 500 carb, the block has top hat liners and the heads are secured with ARP studs. It also had all new bearing and obviously the rockers which you can see hear. Don't know the performance but I'd like to hope around 275bhp and the same in torque. It gets the car up the road very well :)

Comment by James Doulton on April 25, 2017 at 22:54

Those rockers look very clean and bright - are they new? What are you doing to the engine?

Comment by Liam Bourne on April 25, 2017 at 6:35
You know when you write something and mean something completely different, well that's what I've done here. I meant, as a few people have said, I was checking the tappet pre load and not valves at all. My bad (-:
Comment by James Doulton on April 24, 2017 at 23:15

Hydraulic? I had forgotten that - if I had ever known it! I find adjusting the 8 valves on a Pinto a real back-breaker (even before my recent problems), give me pushrods and tappets anytime.

Comment by Big Vern on April 24, 2017 at 21:02

Didn't say there was anything wrong with the pic or the engine Daryl.

Its an RV8 they have hydraulic cam followers so no valve clearance check LOL Didn't think I'd need to explain that

Comment by James Doulton on April 24, 2017 at 20:43

For driving pleasure, the more the merrier. I think that by the time you have that many cylinders then you really need "a man" to do the maintenance for you!

Comment by Big Vern on April 24, 2017 at 20:03

Bahahahaha  LOL  :)))))

Comment by Big Vern on April 24, 2017 at 20:02

Bahahahaha!!!! LOL

© 2024   Created by Tim Walker (The Bodger).   Powered by

Report an Issue  |  Terms of Service