Dutton Kit Cars and their owners
Just a few photos of where we're at with the Phaeton upgrades....
Adjustable bottom arms, all modded with brackets and looking saucy. Unfortunately, however, the rose joint inner races are 1/2" and the existing bolts are 7/16", so I need to drill out the bolt holes and fit 1/2"…Continue
Added by Roy Kemp on December 23, 2016 at 19:51 — No Comments
First up, I just wanted to say a big thanks to all of you that commented on my previous blog entry and forum post on ARB relocation. Didn't even know what a caster angle was before all that. I'm still bloody clueless, but now at least I'm aware of more things that I'm ignorant of, and need to be aware of. Always a good first step!
So, popped round to see how my fabricator chum is getting on with the various bits on the Phaeton. The adjustable TCAs…Continue
as the title say's, hard work this being retired. Today I finished Jame's Duttonator, cleaned the Saab, took template for Sierra exhaust (bit of 10mm copper), shuffled the cars around then back again. nearly came a cropper in the Marlin (brakes are fantastic), done a couple hours gardening, finished off with a shopping trip to ASDA. Oh, and swept up the leaves on the patio. I'm off to bed goodnight all :-)
More progress on the Legerra re-build, A mate came round and did my brake lines for me in about a tenth of the time it would have taken me! then we took the Body down from it's sling in the garage and got it on the chassis, Needed to cut a section out of the bulkhead due to the Zetec Thermostat housing on the back of the head getting in the way.
I also needed to cut away where the gear stick will be as my gearbox seems to sit a little too high, so i have a few bits of bodywork to…Continue
Actually managed to wangle a few spare hours to work on the Dutton yesterday. Which, given present commitments, is a minor miracle in itself. So, you may recall from previous blog posts that I've got a pile of fancy bits to fit, stuff to fix, things to modify/improve, etc.
So, I decided to have a decent loo at my front suspension which has always been a bit of a bugbear of mine. The car is phenomenally understeery, even taking the locking diff into…Continue
anyone else find they cannot add posts to some topics?
i for example built myself a 16 X 8 foot shed to house one of my cars from a supply of reclaimed timber, it came with enough timber to build a building 24' by 12' to store two racing dinghy’s both 16' by 5'... The way i built the shed/garage was to suit the ply sheets i bought (8x4 sheets......) using a simple 4 x 4 frame and a stressed skin from the ply sheets ,......very stiff and quick to build. total cost of all the materials…Continue
For those days when your parts just can't arrive quick enough, for sunny days when the transit just isn't 'fun'...
Coming soon to a shed near me.
1997 DOHC, weber TC, MT75 box and Sierra fixed 3.72 diff in a Phaeton 3/4 hybrid.
I did some playing on gear calc and the theoretical stats look like this.…
2011 - Car bought. Not having been laid up for many year the car was going to need some restoration to get it back on the road.
2012 - Spent time wondering about changing from Pinto power. Bought various V6…Continue
Today I bought another Dutton. This one has a 3.1 litre Essex V6. It's MOT has lapsed and it has a number of issues, the biggest one being that it has had a front end shunt which has upset the suspension geometry, and the bonnet fit, and the steering. The last 6 inches of the main rail is crumpled, moving the ARB. Finding a good reference to work from to restore the geometry looks to be an interesting puzzle. In this picture you can see that the nearside wheel has a different camber to the…Continue
I will be dismantaling my Pheaton S3 shortly and wounderd if any of you would be intrested in the body and chassis screen and other dutton parts, Chassis is 5 linked andd they will be with the chassis I would like £150 correctly registerd. unfortuately the car is in the north of scotland…Continue
I went to the KitNet track day at Castle Combe today in my Legerra. It was cracking weather and I had a good day. There were positives and some negatives. So starting with then the positives: My new tyres performed well and took 5 seconds off my lap times (down to 1m 35sec), I finally got the Legerra over the ton at 100.3mph on the straight, I met a load of nice chaps and did a lot of chatting plus, to round off the day, I drove it home at the end of the day. Two of the chaps were Duttons -…Continue
Hi Gents, Just wondering is there a page on the web of items members are selling / wanting get rid of, I am looking for a pair of rear light clusters for a Dutton s3
This is how my Dutton started his Dutch life. As you can see the British license plate is still on. Based on my research the Dutton moved from the UK to Holland in the summer of 2012. Does anyone recognise the car and may be knows the UK - history. The donor car was Ford Escort Mk II from 1978, also based on my…Continue
Here I am, also a Dutton owner!
Since a few weeks a Dutton owner. I started to look for a Donkervoort, Westfield, MK Indy but after a look at my motorbikes and Bank account I decided to start "low profile", in fact low budget.
And I bought a Dutton Pheaton S3, 1978, with Honda CBR 1000 engine.
Nice configuration but I have to spend some time on it to get it on my quality level.
So I will.
Added by Bert Nieuwenhuizen on August 9, 2016 at 19:58 — No Comments
Been out playing again today. This is significant because it's almost exactly one year since we wheeled the Phaeton out for its first Autotest. You may remember, or even refresh yourselves by revisiting my old blog post, that both Steve and I were truly shocking that day, and various things went wrong with the car. We were last and second-last by a long bloody way on the 2015 SDMC July Autotest.
Fast-forward one year.
We've kinda hit quiet time of the year for Autotesting as clubs get stuck into organising rallies and things like that instead, so I've revisited a few of the things I'd like to develop on the Phaeton.
1. Double width triple ARB kit - Bought ages ago but not fitted. You may remember I had to scrounge some bushes from a guy to do an event as I noticed the bushes were stuffed the day before, and he only had double width ones. So I had to fit these in…Continue
so how to you get to the bulbs on the rear lights of a sierra .....:-0