DuttonOwners

Dutton Kit Cars and their owners

All Blog Posts (511)

Dutton phaeton chassis number

Hi I have just bought a phaeton less the V5c it's not been used since 1991 but the last 2 digits on the vin plate are badly scratched is there a way of getting the chassis number from the reg number so I can fill in the v62c request form p. S. Hi Adrian haven't talked for a while Trust you are well

Added by Allan Gilroy on October 21, 2019 at 20:50 — 1 Comment

Keeping this show on the road.

Hey all, I'm back...again. I'm going to try not and make a habbit of this back and forth-ing lark.

The story so far (cliff notes addition); kit kept at my Grandads, he died middle of last year denting morale and motivation, house on the market (been a nightmare in its own right), realised I now had nowhere to keep the car, parents are buying a house in Somerset with a garage and have said I can move my Phaeton to there and although it means it will be 145 miles away it's practically…

Continue

Added by Toby Fitzgerald on September 25, 2019 at 21:34 — 2 Comments

Melos for sale! Reduced price!

Hi All - As I said in my original post (below) it's hard to put a value on cars like this, but although I've had interest from various quarters, the car is still here so I have to assume I've overpriced it.

Now that the season is coming to an end and you may want something to keep you busy over the winter (not that it needs anything doing!), I'm opening it to sensible offers - say, £1750 ono.

If that makes it more tempting for you, please e-mail me to arrange a…

Continue

Added by Chris Chester on September 3, 2019 at 17:41 — 1 Comment

trimmer

message to Andrew pounder .saw your blog and I am a trimmer by trade if you need any help or work doing

Added by Paul barford on April 30, 2019 at 14:04 — 7 Comments

New Owner

I have finally taken the plunge and purchased the remains of a Dutton B type. In addition to my head looking at I think I’m in need of some weather gear. Is there any thing out there? Or is there a company out there making new items? 

Added by Andrew Pounder on April 10, 2019 at 21:05 — 5 Comments

my dear wife

For all who know Margaret. On Saturday night not to well. Sunday watching the rugby taken ill again.

Monday morning big yellow box with flashing lights outside my house for an hour saved her life. Another huge episode yesterday in intensive care. Not well enough for op yesterday. Under going big op this morning, promised she will be fit again soon. Bit of plumbing and rewiring and right as rain.

Added by Steve Kerswell on February 14, 2019 at 8:39 — 6 Comments

Phaeton S3 Autotester - 2019 update / ST170 lump!

Hello all, and belated HNY to everyone!

I didn't manage to get the Phaeton out as much as I'd have liked last year, and I'm still waiting for that first win. Even in little events where it's me versus three Micras... quite embarrassing.

Anyway, I got the rear leaf spring mounts beefed up nicely after on failed. One rear damper was shot so it's on new spax gas adjustables at the back, and polybushes on the whole rear end. Other than that, we didn't really upgrade…

Continue

Added by Roy Kemp on January 10, 2019 at 20:00 — 6 Comments

legerra gearbox

im looking at possible options for a 5 speed box to fit in my leggera over the winter i could go for the type 9 box but they are getting pricey these days and i would have to change/do some chassis mods to get it in there .so i was thinkin mx5 or rx8 i believe these are both rwd boxes but im not sure of size in comparison to the type 9  also the prop could be an issue if they are different splines .any one with experience on this ??? your advice would be appreciated 

Added by James paton on July 19, 2018 at 0:20 — 42 Comments

After almost a decade in the garage, I have finally had the time and motivation to start getting my Melos back on the road. LED lights all set up for the front end now. Polybush suspension. New fuel …

After almost a decade in the garage, I have finally had the time and motivation to start getting my Melos back on the road. LED lights all set up for the front end now. Polybush suspension. New fuel tank and pipe work next along with silicone cooling hoses, new exhaust system required and interior to clean up. Replacing the pepper pot wheels with a set of smart 15" alloys in anthracite.…

Continue

Added by Andrew Kettell on July 18, 2018 at 9:17 — 3 Comments

Well that's that then

Wednesday 11th near midnight, my Grandad past away after going into hospital for stomach pains a few days prior. My family has set about getting the funeral arranged and looking at clearing the house to put it on the market. It's a big place with a lot of "treasures" (as my Grandad called them) from charity shops, but also quite a lot of important family related docs/pics/items so will actually take quite a while to fully sort through. This gives me a little time to make arrangements for the…

Continue

Added by Toby Fitzgerald on July 15, 2018 at 14:42 — 3 Comments

so it begins

so today it begines to look worse before better body work, not to bad most cracks were bad paint reaction dug out the star cracks and it was only in the gel coat so using the carbon fiber filler…

Continue

Added by allan wheatley on July 10, 2018 at 19:35 — 11 Comments

about time

well what can I say only just got back on this lol

2017 was a crap year for me dad got terminal cancer and found out on my birthday so was looking after him most of last year till he passed bonfire night and my best friend passed away nearly same time so no work on Dutton as no money to do anything , 

2018 came right got to get my arse in gear lots have happened to my Dutton 

got it though mot new brakes all round new exhaust full service and electronic ignition, new…

Continue

Added by allan wheatley on July 10, 2018 at 9:55 — 2 Comments

Race against time

For quite a while now I've been battling with my rear suspension and replacing the rear shocks (as well as holidays etc). I originally just wanted to replace what was required to test drive it to decide if I liked the car. If I did then the plan was to upgrade it to a 5 link system as many have suggested. (Keep this in mind for a sec).

However, cutting straight to the point; my Grandad has been diagnosed with terminal cancer in multiple places including the liver. The doctors don't…

Continue

Added by Toby Fitzgerald on June 27, 2018 at 19:06 — 4 Comments

Melos body

i have a Melos body with bumpers and a hard top need to move on let me know if you are interested.

Added by Nick carlin on June 11, 2018 at 23:50 — 1 Comment

Getting back on it

been digging foundations and relaying driveway ready to build mums 'summer house'

finished bike (mot pass / advisory rear tyre low) knobblies then next :) but they did snap my kickstart grrr

wood framing next to get rid of the wood to make space to get frame back inside - yay

Added by Darren (Fl@pper) James on May 27, 2018 at 10:32 — 1 Comment

Phaeton S3 Autotester - May '18 update

Can't remember if I updated the blog earlier this year or not, but last time I was out playing in the Phaeton I battered it over a cone and into a ditch. Not sure if it was the ditch or the cone, but I burst the radiator and put it out of action for the day.

So, not wanting to pay Mk1/Mk2 Escort tax on a new radiator, I ordered a 3-row aluminium radiator. Intended for a Honda Civic, but cheap at £59 delivered and looked like it could be persuaded to fit. Needed a bit of angle…

Continue

Added by Roy Kemp on May 3, 2018 at 13:33 — No Comments

Look ma, I'm famous!

So I wrote a letter into complete kit car magazine and got the letter of the month.

Gave a shout out to you guys too for being awesome.

Added by Toby Fitzgerald on April 23, 2018 at 19:48 — 1 Comment

Update

Wow I haven't done an update in a long time :/

Cliff notes

- New fuel tank ordered...issues encountered.

- Master cylinders refurbished, honed and now with new seals. Refitted.

- Pedals cleaned up.

- Brake calipers fully refurbished with all new parts including a repaint.

- Brakes refitted and bled...then one seized, assumed it only minor so temporarily ignored.

- Clutch slave cylinder refurbished, honed and now with new seals.…

Continue

Added by Toby Fitzgerald on April 17, 2018 at 20:24 — No Comments

legerra soft top

hi folks just wondering what fixing some of you guys are using on the legerra soft top front fixing the ones that are on mine are a bit fiddely to get located and locked down i wid be soaked by the time i had managed to get the roof on i had removed the fiddely ones and replaced them with m6 bolts and thumb screws makes it a bit quicker and easier but interested what other folks are using  thanks in advance 

Added by James paton on March 5, 2018 at 20:09 — 54 Comments

Engine servicing progress

So for the past couple of weeks I've been gearing up to fully service the engine.

- Radiator removed and checked, seems in good condition with no leaks...until I tried to force the drain plug which split the solder and created a leak. Currently getting that fixed.

- New water pump fitted along with a new belt.

- Oil drained out and then spilt on the gravel driveway...genius. Sump plug came out okay which was a result as reading the Vitesse forums a lot of people have…

Continue

Added by Toby Fitzgerald on February 6, 2018 at 20:20 — 4 Comments

Monthly Archives

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

© 2019   Created by Tim Walker (The Bodger).   Powered by

Report an Issue  |  Terms of Service