Dutton Kit Cars and their owners
Adrian Southgate's Blog – August 2013 Archive (1)
Today I have been mostly
avoiding taking the engine out of the Sierra (AGAIN) This was accomplished by attacking the floor in the cab with an angle grinder and buzz saw. The end result will be a much lower tunnel which will then allow my seats to fit properly. In the process I have removed thin tin plate, polystyrene blocks, a shed load of P40 and some cardboard (soggy).
Killing P40 and P38 with a flap disc in the angle grinder REALLY makes the dust fly. I ache from leaning in through the door of the car but…
ContinueAdded by Adrian Southgate on August 18, 2013 at 20:52 — 13 Comments
About
© 2024 Created by Tim Walker (The Bodger).
Powered by
