DuttonOwners

Dutton Kit Cars and their owners

so today it begines to look worse before better body work, not to bad most cracks were bad paint reaction dug out the star cracks and it was only in the gel coat so using the carbon fiber filler

the main sanding and filling the back end is nearly done just got to wet sand to 600 grit then start on the front

Views: 102

Add a Comment

You need to be a member of DuttonOwners to add comments!

Join DuttonOwners

Comment by allan wheatley on July 31, 2018 at 13:48

Comment by allan wheatley on July 28, 2018 at 9:45

updates getting there begining to look like a car again

Comment by allan wheatley on July 19, 2018 at 21:57

now in primer filler

Comment by allan wheatley on July 19, 2018 at 21:54

yea daryl dont no what paint was on it last plus a few differnt colours so always safe to do that

Comment by Daryl Heasman on July 19, 2018 at 20:25

Your using an Isolator then Allan 

Comment by allan wheatley on July 19, 2018 at 8:10

Comment by Daryl Heasman on July 15, 2018 at 11:38

Allan there are some available on ebay . they are a race tyre for the road so mileage will not be great ,from memory  very good in dry conditions but don't take them out in the wet . ps I have the same problem  Pirelli P6s

Comment by allan wheatley on July 15, 2018 at 10:29

James the arches are extended by abut 2 in to accomidate the 225/60/13 wheels it has on it witch will be fun tring to find tyres for it as they dont make them anymore

Dave adams no it has a early cortina english back axle with 6 link bar kit on it

Comment by Dave Adams on July 15, 2018 at 7:17

has it been converted to Sierra running gear?

Comment by James Doulton on July 14, 2018 at 20:14

It is looking good. Those wheel arches look wider than normal. What rear axle do you have?

© 2018   Created by Tim Walker (The Bodger).   Powered by

Report an Issue  |  Terms of Service