Comments - Bit Miffed - DuttonOwners2024-03-28T10:37:16Zhttp://duttonowners.ning.com/profiles/comment/feed?attachedTo=2398922%3ABlogPost%3A154229&xn_auth=noNo it was more a case of the…tag:duttonowners.ning.com,2015-02-13:2398922:Comment:1597232015-02-13T21:01:51.208Zjohn whttp://duttonowners.ning.com/profile/johnw
No it was more a case of the grief he was being given on here
No it was more a case of the grief he was being given on here not so odd then.....might be…tag:duttonowners.ning.com,2015-02-13:2398922:Comment:1599022015-02-13T20:56:51.333ZDave Adamshttp://duttonowners.ning.com/profile/DaveAdams
<p>not so odd then.....might be a question of teddy out of the pram.....</p>
<p>not so odd then.....might be a question of teddy out of the pram.....</p> odd.........tag:duttonowners.ning.com,2015-02-13:2398922:Comment:1599912015-02-13T20:41:49.355ZDave Adamshttp://duttonowners.ning.com/profile/DaveAdams
<p>odd.........</p>
<p>odd.........</p> Wayne?
tag:duttonowners.ning.com,2015-02-13:2398922:Comment:1597972015-02-13T20:25:04.283ZDave Adamshttp://duttonowners.ning.com/profile/DaveAdams
<p>Wayne?</p>
<p></p>
<p>Wayne?</p>
<p></p> who's left?
tag:duttonowners.ning.com,2015-02-13:2398922:Comment:1599892015-02-13T20:22:29.714ZDave Adamshttp://duttonowners.ning.com/profile/DaveAdams
<p>who's left?</p>
<p></p>
<p>who's left?</p>
<p></p> A mate has a hydraulic pulle…tag:duttonowners.ning.com,2015-02-13:2398922:Comment:1573172015-02-13T15:48:27.361ZSteve Kerswellhttp://duttonowners.ning.com/profile/steveKerswell
<p>A mate has a hydraulic puller, porta press adapter, very efficient, he had it done before I had the kettle boiled !</p>
<p>A mate has a hydraulic puller, porta press adapter, very efficient, he had it done before I had the kettle boiled !</p> HOORAY! The prop is all back…tag:duttonowners.ning.com,2015-02-13:2398922:Comment:1573902015-02-13T14:01:51.889ZSteve Kerswellhttp://duttonowners.ning.com/profile/steveKerswell
<p>HOORAY! The prop is all back together and refitted (all fitted in the rain as well), pleased to say it sounds a lot better, only a little clonk now from the diff on take up, nothing some sawdust wont quieten down :-)))</p>
<p>HOORAY! The prop is all back together and refitted (all fitted in the rain as well), pleased to say it sounds a lot better, only a little clonk now from the diff on take up, nothing some sawdust wont quieten down :-)))</p> Mine has a one piece prop Ste…tag:duttonowners.ning.com,2015-02-10:2398922:Comment:1573582015-02-10T21:25:24.915ZAdrian Southgatehttp://duttonowners.ning.com/profile/AdrianSouthgate
<p>Mine has a one piece prop Steve, made from a larger gauge tube than the itty bitty sports models and i'm running a 2 litre. Been fine for the last two years apart from the slight issue when I swapped gearboxes.</p>
<p>Mine has a one piece prop Steve, made from a larger gauge tube than the itty bitty sports models and i'm running a 2 litre. Been fine for the last two years apart from the slight issue when I swapped gearboxes.</p> Do I need this centre bearing…tag:duttonowners.ning.com,2015-02-10:2398922:Comment:1571362015-02-10T18:17:20.359ZSteve Kerswellhttp://duttonowners.ning.com/profile/steveKerswell
<p>Do I need this centre bearing? Could I just cut the ends out and replace with a piece of tube, one piece prop instead of all these joints and supports.</p>
<p>Do I need this centre bearing? Could I just cut the ends out and replace with a piece of tube, one piece prop instead of all these joints and supports.</p> Back to doom and gloom, strug…tag:duttonowners.ning.com,2015-02-10:2398922:Comment:1571712015-02-10T16:51:15.420ZSteve Kerswellhttp://duttonowners.ning.com/profile/steveKerswell
<p>Back to doom and gloom, struggling to pull the old bearing off the prop. 3 legged puller has bent. Big angle grinder tomorrow if it don't behave this evening, having a warm up now,bleeding perishing today.</p>
<p>Back to doom and gloom, struggling to pull the old bearing off the prop. 3 legged puller has bent. Big angle grinder tomorrow if it don't behave this evening, having a warm up now,bleeding perishing today.</p>