Comments - Q42 CPF - Progress - DuttonOwners2024-03-28T13:00:56Zhttp://duttonowners.ning.com/profiles/comment/feed?attachedTo=2398922%3ABlogPost%3A220809&xn_auth=noJames, it will be a new props…tag:duttonowners.ning.com,2017-10-05:2398922:Comment:2380872017-10-05T20:26:40.765ZDave Pricehttp://duttonowners.ning.com/profile/DavidPrice507
James, it will be a new propshaft as I have also swapped to an Atlas axle.
James, it will be a new propshaft as I have also swapped to an Atlas axle. I'm about to approach this wi…tag:duttonowners.ning.com,2017-10-05:2398922:Comment:2379972017-10-05T08:28:02.799ZSteve Kerswellhttp://duttonowners.ning.com/profile/steveKerswell
<p>I'm about to approach this with the MX5 box, think I'm needing another crossmember to mount off.</p>
<p>I'm about to approach this with the MX5 box, think I'm needing another crossmember to mount off.</p> Nearly there. I assume that t…tag:duttonowners.ning.com,2017-10-04:2398922:Comment:2379962017-10-04T22:14:43.703ZJames Doultonhttp://duttonowners.ning.com/profile/JamesDoulton
<p>Nearly there. I assume that the existing propshaft will need to be cut down?</p>
<p>Nearly there. I assume that the existing propshaft will need to be cut down?</p> Bracket made ready to fit.tag:duttonowners.ning.com,2017-10-04:2398922:Comment:2380862017-10-04T12:10:58.082ZDave Pricehttp://duttonowners.ning.com/profile/DavidPrice507
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/3129083535?profile=original" target="_self"><img width="750" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/3129083535?profile=RESIZE_1024x1024"/></a>Bracket made ready to fit.</p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/3129083535?profile=original" target="_self"><img width="750" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/3129083535?profile=RESIZE_1024x1024"/></a>Bracket made ready to fit.</p> bracket fabricated from 3mm f…tag:duttonowners.ning.com,2017-10-04:2398922:Comment:2379952017-10-04T12:09:11.019ZDave Pricehttp://duttonowners.ning.com/profile/DavidPrice507
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/3129083585?profile=original" target="_self"><img width="750" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/3129083585?profile=RESIZE_1024x1024"/></a>bracket fabricated from 3mm flat bar and some 25mm box located</p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/3129083585?profile=original" target="_self"><img width="750" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/3129083585?profile=RESIZE_1024x1024"/></a>bracket fabricated from 3mm flat bar and some 25mm box located</p> Mounting bracket for RX8 gear…tag:duttonowners.ning.com,2017-10-04:2398922:Comment:2382152017-10-04T12:06:34.455ZDave Pricehttp://duttonowners.ning.com/profile/DavidPrice507
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/3129083327?profile=original" target="_self"><img width="750" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/3129083327?profile=RESIZE_1024x1024"/></a>Mounting bracket for RX8 gearbox, this will then sit on two engine mounts sat on a Cortina crossmember, secured furtherback</p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/3129083327?profile=original" target="_self"><img width="750" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/3129083327?profile=RESIZE_1024x1024"/></a>Mounting bracket for RX8 gearbox, this will then sit on two engine mounts sat on a Cortina crossmember, secured furtherback</p> tag:duttonowners.ning.com,2017-09-26:2398922:Comment:2379692017-09-26T11:35:31.292ZDave Pricehttp://duttonowners.ning.com/profile/DavidPrice507
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/3129083075?profile=original" target="_self"><img width="750" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/3129083075?profile=RESIZE_1024x1024"/></a></p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/3129083075?profile=original" target="_self"><img width="750" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/3129083075?profile=RESIZE_1024x1024"/></a></p> Having to cut off the exis…tag:duttonowners.ning.com,2017-09-26:2398922:Comment:2381682017-09-26T11:35:11.061ZDave Pricehttp://duttonowners.ning.com/profile/DavidPrice507
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/3129082604?profile=original" target="_self"><img width="750" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/3129082604?profile=RESIZE_1024x1024"/></a></p>
<p></p>
<p></p>
<p>Having to cut off the existing gearbox mounts from the chassis. Going to fabricate some new ones and weld them further back along with a new mount fastened to the gearbox</p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/3129082604?profile=original" target="_self"><img width="750" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/3129082604?profile=RESIZE_1024x1024"/></a></p>
<p></p>
<p></p>
<p>Having to cut off the existing gearbox mounts from the chassis. Going to fabricate some new ones and weld them further back along with a new mount fastened to the gearbox</p> When you put in the clutch pl…tag:duttonowners.ning.com,2017-09-23:2398922:Comment:2378632017-09-23T19:02:17.772ZPaul Thomashttp://duttonowners.ning.com/profile/PaulThomas
<p>When you put in the clutch plate the finger will move forward and so will your clutch fork</p>
<p>When you put in the clutch plate the finger will move forward and so will your clutch fork</p> Doesn't every dutton owner ne…tag:duttonowners.ning.com,2017-09-22:2398922:Comment:2378612017-09-22T12:11:34.197ZAdrian Southgatehttp://duttonowners.ning.com/profile/AdrianSouthgate
<p>Doesn't every dutton owner need to clean the garage out? I need a skip to do mine...</p>
<p></p>
<p>Doesn't every dutton owner need to clean the garage out? I need a skip to do mine...</p>
<p></p>