DuttonOwners

Dutton Kit Cars and their owners

slowly but surely

Rating:
  • Currently 5/5 stars.

Views: 129

Add a Comment

You need to be a member of DuttonOwners to add comments!

Join DuttonOwners

Comment by James Doulton on January 28, 2019 at 0:20

I understand your pain Steve. I wired in the tow bar on my Hyundai a couple of years ago and was very pleased when it all worked first time. However that was only 12 wires or so, and I had diagrams, and it took all day, and I had to keep checking what I had done because my memory is not as good as it used to be for these things. Plus some parts of the job need reading glasses and other parts don't. A horrible job.

But as BV says, hacking it might just make it even worse. At least now you think it might be right but if you chop it about then it will be a bu**er to get it back together if you find out that you need something that you've removed.

If it was me then I'd check what Pate Clayton's mate did.

Comment by Big Vern on January 27, 2019 at 22:01

I have a MK1 MX5 Steve and apart from the popup headlight motors, electric windows and the radio, what else is superfluous? I should have thought you would need the rest. Stripping the loom down often doomed a project when you spend months trying to get everything to work. Keep it simples

Comment by Pete Clayton on January 27, 2019 at 20:14

One of my mates has mk1 mx5 running gear and looms in his MEV, he's got some diagrams if they would help Steve?

Comment by Adrian Southgate on January 27, 2019 at 20:09

It does look like a typical japanese loom, over complicated with too many split return wires. Separating the groups first could be the best way, concentrate on the engine loom first. Popping the wires out of the loom plugs one at a time, separating them and then cable tying them back takes forever but it's the only way to thin it out.

I had issues with my old bluebird back in the early 90's, had to strip and re-do the entire engine bay loom, too many 'joiners' in the battery supply wires. Don't know if the Mazda loom is the same but i'm guessing there are duplicated wires for some functions in there or they've just gone the 'long way round' on everything.

Comment by Steve Kerswell on January 27, 2019 at 19:15

trouble being Ade, I make some progress, then lose confidence in my own work. impossible to understand why some wires go and split to relays and some go straight where I want. Change of plan could be thought of. Thinking of removing all the lighting and indicator stuff and all the dash loom.

Comment by Adrian Southgate on January 27, 2019 at 17:01

One wire at a time Steve. Have you identified and removed the bits you don't need?

Comment by Steve Kerswell on January 27, 2019 at 16:52

may have bitten off more than I can chew with this MX5 loom, spaghetti everywhere, forward and back round and round, very slowly getting somewhere, no idea where though !!!

Comment by Steve Kerswell on December 9, 2018 at 15:24

hoping for mottled stainless, but that is n my mates hands. Or his bosses stock at present

Comment by Brian (up north) Morris on December 9, 2018 at 13:03

looking classy 

© 2024   Created by Tim Walker (The Bodger).   Powered by

Report an Issue  |  Terms of Service