DuttonOwners

Dutton Kit Cars and their owners

Dave Adams's Discussions (1,878)

Search Forum

View

Discussions Replied To (1702) Replies Latest Activity

"Cheers Paul. ..."

Dave Adams replied Mar 27, 2016 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

"I do the same James......it has to be right in my head before i make a start, but of…"

Dave Adams replied Mar 27, 2016 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

"it was intended to be straight but the air tube just didn’t fit over the chassis rai…"

Dave Adams replied Mar 27, 2016 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

"Yeah black is what i wanted....red is what i had.....the manifold flange plate is a…"

Dave Adams replied Mar 27, 2016 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

"Inlet manifold just about done... Another view... Rover sinal red......because it'…"

Dave Adams replied Mar 26, 2016 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

"Then I got some 1mm sheet steel and bent into a 4" X 4" tube for the plenum. .....…"

Dave Adams replied Mar 20, 2016 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

" Made some runners for the manifold....and welded them onto the manifold plate."

Dave Adams replied Mar 20, 2016 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

"No I have a plate for either throttle bodies or the crossflow manifold.....the one I…"

Dave Adams replied Mar 13, 2016 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

"I also have a crossflow manifold....you can see how it matches to the zetec manifo…"

Dave Adams replied Mar 13, 2016 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

"Trial fitted to the engine....to check for clearance and to work out the angle to c…"

Dave Adams replied Mar 13, 2016 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

RSS

About

Tim Walker (The Bodger) created this Ning Network.
Create a Ning Network! »

© 2026   Created by Tim Walker (The Bodger).   Powered by

Report an Issue  |  Terms of Service