Dutton Kit Cars and their owners
fitting seats
hello all. been having a look at fitting seats in sierra today. so i have a few questions on how other peeps have done it.
their are 2 steel pads attached to the chassis . do the seat fixings have to hit both of these pads...?
what about the other 2 fixings...?
has anyone welded box section to the chassis to help with the fitting of seats.
any advice greatly apreciated thankyou.
Replies to This Discussion
-
Permalink Reply by Brian (up north) Morris on
-
your a star. them runners are close together arnt they....
-
Permalink Reply by Steve Kerswell on
-
Yeah, and I'm sure that's why I welded that plate across, to pick up the holes in the chassis plates. As long as it is firm and safe I'm sure you'll be OK. If you need any seat belt bolts I have a few I've been collecting :-))
-
-
:-)) iv got tons of high tensile cap screws but thankyou.
- ‹ Previous
- 1
- 2
- Next ›
About
© 2025 Created by Tim Walker (The Bodger).
Powered by
