Dutton Kit Cars and their owners
S1 Rebuild(s)
some pics of the rebuild process,
the top trailing arm bracket is broke......
the diff is sloping back a little (looking up) so that will need sorting.......
As you can see there isn't a lot of bracing in an S1 chassis, that will be sorted.
Replies to This Discussion
-
Permalink Reply by Dave Adams on
-
the colour is almost 50/50 yellow and red with a dash of green......apparently.
-
-
Progress. ..... new headlights fitted.....grille fitted.
Oh and a new idle valve connecting pipe fitted. The 15mm copper pipe I had used would resonate at high revs it was VERY loud!
Trims to cockpit opening....
It's all coming together. .... I do lack one wiper arm. I have two wiper blade's but just one arm . I am expecting one in the post anytime soon.
-
Permalink Reply by Brian (up north) Morris on
-
hey looking good mr adams
-
-
Cheers mate.....
-
-
man done good another one saved from extinction
-
-
I need a roof bar.....or at least the dimensions to make one.......the main dimension i need is the height from the end that plugs into the roof bar to the top horizontal, the curve radius i will have to see what i can get....
-
-
is it same as melos one. iv got one
-
-
I believe they are....
-
-
Similar enough that it can be adapted anyway.......
-
-
there is.......never thought of that.....DOH!
-
Permalink Reply by Big Vern on
-
Isn't the legerra roof hoop different to the Phaeton S1, My S3 hoop was different to the S1. Might explain why the hood doesn't fit right?
-
-
Looks to be the same.....fitted right in and from memory it looks the same as my old S1
About
© 2025 Created by Tim Walker (The Bodger).
Powered by
