Headlight relays and wiring 3

First I had to fabricate the front part of the inner wing, thought stainless would be the best here as I wanted to use it to mount all the control electronics on it and it is right next to the battery.

Front lights wired in the 2 round relays power the Headlamps 1 for dip and 1 for main beam, the square one is for the spot lamps, the cable for this needs to come from the dash switch as there is no provision for it in the Premier loom.

I still need the front indicators, thats what the dangly wires are for. I have found flashers in our catalogue, so forklift parts will do the job again.

The fuse box has the wrong size fuses fitted at the moment, the spare tag on this is for the air horn compressor