DuttonOwners

Dutton Kit Cars and their owners

Big Vern's Discussions (584)

Discussions Replied To (579) Replies Latest Activity

"VW polo and Peugeot rads are popular as are the Rover. Aaron radiators anddiscount c…"

Big Vern replied Jul 3, 2012 to Radiator Capacity

7 Jul 3, 2012
Reply by Big Vern

"Started my aprenticeship at Astons then moved to Tickford engineering, then Prodrive…"

Big Vern replied Jul 3, 2012 to work

9 Jul 4, 2012
Reply by Big Vern

"yeh long hours eh! Miss the cut and thrust and the excitement but sure don't miss th…"

Big Vern replied Jul 2, 2012 to work

9 Jul 4, 2012
Reply by Big Vern

"Is there anyway of increasing the membership limit or do we have to migrate to anoth…"

Big Vern replied Jun 29, 2012 to The Ning site is nearly FULL

31 Jul 4, 2012

"Sorry Dave, no 2.0L pinto's were ever fitted with 7.5"clutch as standard but the 1.6…"

Big Vern replied Jun 29, 2012 to Pinto clutch disc

47 Jun 4, 2013
Reply by Steve and Matt Pegrum

"surely the release brg slides off the end of the first motion shaft sleeve or at lea…"

Big Vern replied Jun 28, 2012 to Pinto clutch disc

47 Jun 4, 2013
Reply by Steve and Matt Pegrum

"so what were you on about with the cvh clutch on the zetec flywheel. I know its the…"

Big Vern replied Jun 28, 2012 to Pinto clutch disc

47 Jun 4, 2013
Reply by Steve and Matt Pegrum

" put a standerd mondeo clutch in my car i know a 1.8 cvh pressure plate fits on the…"

Big Vern replied Jun 28, 2012 to Pinto clutch disc

47 Jun 4, 2013
Reply by Steve and Matt Pegrum

"You can use the RWD cvh flywheel but they're not thick on the ground and don't have…"

Big Vern replied Jun 28, 2012 to Pinto clutch disc

47 Jun 4, 2013
Reply by Steve and Matt Pegrum

"Been thinking about this overhight. Machining for the drive pins could be a pig with…"

Big Vern replied Jun 28, 2012 to Pinto clutch disc

47 Jun 4, 2013
Reply by Steve and Matt Pegrum

RSS

© 2025   Created by Tim Walker (The Bodger).   Powered by

Report an Issue  |  Terms of Service