DuttonOwners

Dutton Kit Cars and their owners

Jim (across the pond) Adamek's Discussions (307)

Discussions Replied To (237) Replies Latest Activity

"Thanks for all the replies. I ordered the Power Spark coil and electronic ignition.…"

Jim (across the pond) Adamek replied Nov 1, 2014 to Coil Problems

8 Nov 1, 2014
Reply by Jim (across the pond) Adamek

"Do you think this ebay coil and points will work on my Phaeton with the 1974 Hillman…"

Jim (across the pond) Adamek replied Oct 30, 2014 to Coil Problems

8 Nov 1, 2014
Reply by Jim (across the pond) Adamek

"Thanks for the info Graham. The points were open when I connected the battery wire. …"

Jim (across the pond) Adamek replied Oct 28, 2014 to Coil Problems

8 Nov 1, 2014
Reply by Jim (across the pond) Adamek

"No luck. I ran a wire from the + side of the battery to the + side of the coil. The…"

Jim (across the pond) Adamek replied Oct 28, 2014 to Coil Problems

8 Nov 1, 2014
Reply by Jim (across the pond) Adamek

"My problem is the new starter is turning over the engine but it was still missing so…"

Jim (across the pond) Adamek replied Oct 27, 2014 to 1974 Hunter Hillman points

11 Oct 27, 2014
Reply by Jim (across the pond) Adamek

"How can I check if the coil is working? I put the key on and took the end of the coi…"

Jim (across the pond) Adamek replied Oct 27, 2014 to 1974 Hunter Hillman points

11 Oct 27, 2014
Reply by Jim (across the pond) Adamek

"Thanks for the info guys. I am about to start going thru the things you guys have li…"

Jim (across the pond) Adamek replied Oct 27, 2014 to 1974 Hunter Hillman points

11 Oct 27, 2014
Reply by Jim (across the pond) Adamek

"I checked the wires on the coil.....just fine. Now when I loosened the points they c…"

Jim (across the pond) Adamek replied Oct 26, 2014 to 1974 Hunter Hillman points

11 Oct 27, 2014
Reply by Jim (across the pond) Adamek

"I tried regapping the points and now it will not start at all. I gapped at 15 thou n…"

Jim (across the pond) Adamek replied Oct 26, 2014 to 1974 Hunter Hillman points

11 Oct 27, 2014
Reply by Jim (across the pond) Adamek

"Well I ran the new starter. I had to turn the spindle to get it to the point where i…"

Jim (across the pond) Adamek replied Oct 22, 2014 to starter problems

11 Oct 22, 2014
Reply by Jim (across the pond) Adamek

RSS

© 2024   Created by Tim Walker (The Bodger).   Powered by

Report an Issue  |  Terms of Service