Dutton Kit Cars and their owners

Side Panel

First stainless steel side panel, cut shaped and bonded in place.

0 members like this

Rating:

View Full Size

Tags:

Add a Comment

Comment by Paul Sheridan on December 23, 2013 at 20:07: The thickness is 0.9mm and I used a die grinder with a 1mm cut off wheel. The metal came from a company in Nottingham. http://metaloffcuts.co.uk/shop/

Comment by Paul Sheridan on December 23, 2013 at 20:01: Yep all nice and shiny beneath the protective film, and No, there is no return edges for rivets. All the paint will pull off before the CT1 lets go, that stuff is so sticky, you can even apply it under water, and once it cures, that's that!!

But there will be a few safe guards, by way of two bonnet catches and two small catches on the rear of the front wheel arches, all secured through to the chassis side rails.

Comment by Dave Taylor on December 23, 2013 at 19:38: Coming on Paul, finished article is going to look the DB's

About