Rear body mount not level

Add a Comment

Comment by Nick carlin on September 1, 2014 at 12:08

I will be cutting the body support off and weld it back so it's level. The car was always about an inch higher on passenger side. I looked under the car and you can see the left side as not been touching the chassis at all. The right side as a nice rusty print where it has.

Comment by James Doulton on August 31, 2014 at 21:40

Are you tempted to correct the chassis? I don't suppose that the body is also modified to suit the chassis. Are the two side rails level? I wonder why the rear cross bar is fixed differently at the two ends, unless it was to compensate for the body fixing being wrong. If the rear cross bar was in the right place then the body fixing would probably be 2cm out! Amazing.

Comment by Adrian Southgate on August 31, 2014 at 19:21

But thats quite normal, in fact better than normal for a legerra...