Dutton Kit Cars and their owners

Just a few photos of where we're at with the Phaeton upgrades....

Adjustable bottom arms, all modded with brackets and looking saucy. Unfortunately, however, the rose joint inner races are 1/2" and the existing bolts are 7/16", so I need to drill out the bolt holes and fit 1/2" bolts.

Fab guy has chopped holes in the sides of the tub on top sides and added these S-shaped brackets. 

Onto these brackets are bolted the fillet plates behind the corners of the scuttle, as seen here. Captive nuts here form the windscreen mounting points. A bit of tube links these plates at both corners to brace the chassis and tub.

More to follow...

Views: 59

Add a Comment

You need to be a member of DuttonOwners to add comments!

Join DuttonOwners

© 2022   Created by Tim Walker (The Bodger).   Powered by

Report an Issue  |  Terms of Service