DuttonOwners

Dutton Kit Cars and their owners

Dave Adams's Discussions (1,878)

Search Forum

View

Discussions Replied To (1795) Replies Latest Activity

" Made some runners for the manifold....and welded them onto the manifold plate."

Dave Adams replied Mar 20, 2016 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

"No I have a plate for either throttle bodies or the crossflow manifold.....the one I…"

Dave Adams replied Mar 13, 2016 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

"I also have a crossflow manifold....you can see how it matches to the zetec manifo…"

Dave Adams replied Mar 13, 2016 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

"Trial fitted to the engine....to check for clearance and to work out the angle to c…"

Dave Adams replied Mar 13, 2016 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

"Yes I did......and a royal pain in the bum it was too..... Chain drilled. Cold chise…"

Dave Adams replied Mar 13, 2016 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

" Fitted to the injector plate cut from the old plastic manifold. ..."

Dave Adams replied Mar 13, 2016 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

"A little more filing for the ports and it's good enough..."

Dave Adams replied Mar 13, 2016 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

"My inlet manifold adaptor plate made from 3mm thick plate.....just need some short…"

Dave Adams replied Mar 13, 2016 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

"the pinto is an expensive engine to tune, its generally cheaper to change the engine…"

Dave Adams replied Mar 12, 2016 to Head Rebuild

 10 Mar 16, 2016
Reply by Neville Smith

"Great........text or phone me we can sort something out..."

Dave Adams replied Mar 7, 2016 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

RSS

About

Tim Walker (The Bodger) created this Ning Network.
Create a Ning Network! »

© 2025   Created by Tim Walker (The Bodger).   Powered by

Report an Issue  |  Terms of Service