DuttonOwners

Dutton Kit Cars and their owners

Big Vern's Discussions (651)

Discussions Replied To (648) Replies Latest Activity

"Its a manifold heater. Quite common in the mid to late '80s. It comes on when the en…"

Big Vern replied Jul 16 to Inlet Manifold

5 on Saturday
Reply by Roy Kemp

"Removing the arb causes more front roll just the thing you need to keep to a minimum…"

Big Vern replied Jun 30 to Compression Struts / Anti-Roll Bar

25 Jun 30
Reply by Big Vern

"The Duttons I have encountered with mobike monoshox on (phaeton3 and melos) were fit…"

Big Vern replied Jun 30 to Compression Struts / Anti-Roll Bar

25 Jun 30
Reply by Big Vern

"Maximum contact patch under all conditions is only really possible with camber compe…"

Big Vern replied Jun 28 to Compression Struts / Anti-Roll Bar

25 Jun 30
Reply by Big Vern

"Proper wiring loom smoke :-) "

Big Vern replied Jun 15 to Rewire time? You'll need some of this:-

6 Jun 16
Reply by Dave Adams

"can you post a link?"

Big Vern replied Jun 11 to Melos project for sale

9 Jun 12
Reply by Adrian Southgate

"Paul, Yours must have been built with a massive amount of negative camber if you nee…"

Big Vern replied Jun 7 to Wonderful Engineering

16 Jun 11
Reply by James Doulton

"Hi Daryl, I know this sounds a bit obvious but you did put the hexagonal oil pump dr…"

Big Vern replied May 31 to The Issue's

2 May 31
Reply by Daryl Heasman

"The case for the MX5 engine/box is: Engineered by Recardo for Mazda to be a sports c…"

Big Vern replied May 27 to New build

4 May 27
Reply by Big Vern

"MX5 engine and box (1.6 is better than 1.8 IMHO) Narrowing the rear could be fraught…"

Big Vern replied May 25 to New build

4 May 27
Reply by Big Vern

RSS

© 2017   Created by Tim Walker (The Bodger).   Powered by

Report an Issue  |  Terms of Service