2013-09-22 17.31.42

Add a Comment

Comment by Mark Reeve on October 14, 2013 at 19:46

That's what I was worried about as my exhaust runs under the car and I can just get 5 fingers between the sump and the road.But I have noticed that the propshaft has been touching the chassis cross member,so could do with some 1/2 inch lowering blocks at least....

Comment by James Doulton on October 13, 2013 at 21:29

Strangely enough, that Smart looked quite similar at the back.

I tried lowering the rear of my Melos with a 2" lowering kit but with the exhaust running under the body then it scraped on the dropped kerb onto my drive. If you have a side exhaust then you can probably get away with it.

Comment by Mark Reeve on October 13, 2013 at 20:02

Ha Ha is that why I got soaked today :0)

Comment by Mark Reeve on October 13, 2013 at 19:59

I don't like the big gap between top of rear tyre and wheel arch,  Has any one fitted lowering blocks to help this.