DuttonOwners

Dutton Kit Cars and their owners

Big Vern's Discussions (591)

Discussions Replied To (576) Replies Latest Activity

"Thats usually when its time to start working on the Dutton - whatever the weather :-)"

Big Vern replied Jan 16, 2013 to You know its too cold to work on the Dutton when....

32 Jan 21, 2013

"Location of the two rear core plugs on a pinto, pretty much impossible to change in…"

Big Vern replied Jan 15, 2013 to Replacing Pinto core plugs

22 Jan 17, 2013
Reply by Dave Adams

"Well you would do Dave, as you can take the entire front off for easy access. The Me…"

Big Vern replied Jan 15, 2013 to Replacing Pinto core plugs

22 Jan 17, 2013
Reply by Dave Adams

"If its anything like the laser levels I had recently then your tracking could end up…"

Big Vern replied Jan 15, 2013 to Geometry

7 Feb 2, 2013
Reply by Dave Adams

"How we used to set up the rally cars, cheap to make and handy on a test day. I have…"

Big Vern replied Jan 14, 2013 to Geometry

7 Feb 2, 2013
Reply by Dave Adams

"Hit your finger with a hammer and you don't feel it:-0"

Big Vern replied Jan 13, 2013 to You know its too cold to work on the Dutton when....

32 Jan 21, 2013

"I've measured two sets of these and they both had 300lb/inch springs but they came f…"

Big Vern replied Jan 9, 2013 to suspension and springs

21 Jan 13, 2013
Reply by Andy Smith

"Yes Steve your dampers probably are wrong, they were designed for a triumph herald/s…"

Big Vern replied Jan 9, 2013 to suspension and springs

21 Jan 13, 2013
Reply by Andy Smith

"The smart going off line like that is down to the damping not the spring rate, most…"

Big Vern replied Jan 9, 2013 to suspension and springs

21 Jan 13, 2013
Reply by Andy Smith

"The stuff you've posted of Andy S's makes no sense. Firstly the suspension on the ea…"

Big Vern replied Jan 9, 2013 to suspension and springs

21 Jan 13, 2013
Reply by Andy Smith

RSS

© 2025   Created by Tim Walker (The Bodger).   Powered by

Report an Issue  |  Terms of Service