DuttonOwners

Dutton Kit Cars and their owners

Dave Adams's Discussions (1,878)

Search Forum

View

Discussions Replied To (1702) Replies Latest Activity

"good to see it go to a good home scot....if you need advise on the build i have done…"

Dave Adams replied Sep 14, 2014 to Phaeton S1 project - for sale

 41 Sep 14, 2014
Reply by Dave Adams

"cooling on Duttons is often very poor due to the location of the radiators and the l…"

Dave Adams replied Sep 14, 2014 to Running rebuild

 48 Sep 29, 2014
Reply by Mark Bagnall

"there are a number of steel stockholders near me they tend to be a lot cheaper than…"

Dave Adams replied Sep 11, 2014 to Project Legerra

 160 Feb 11, 2020
Reply by Dave Adams

"it does show that the extra cost and weight of 3 mm wall thickness over 1.6 mm is no…"

Dave Adams replied Sep 11, 2014 to Project Legerra

 160 Feb 11, 2020
Reply by Dave Adams

"the problem i have with large spacers is the weight especially on the front. (the sp…"

Dave Adams replied Sep 11, 2014 to Pete's S4

 144 Sep 8, 2015
Reply by Pete Clayton

"the point where the chassis rail strengthening turns to follow the original chassis…"

Dave Adams replied Sep 10, 2014 to Project Legerra

 160 Feb 11, 2020
Reply by Dave Adams

"the steel used for the strengthening is a little over engineered with 3 mm thick wal…"

Dave Adams replied Sep 10, 2014 to Project Legerra

 160 Feb 11, 2020
Reply by Dave Adams

"the wheels look fine, the 1" spacers seem quite big but i have seen thicker on some…"

Dave Adams replied Sep 10, 2014 to Pete's S4

 144 Sep 8, 2015
Reply by Pete Clayton

"Thats what I am hoping. ......whats there was decoration only it's had no practical…"

Dave Adams replied Sep 9, 2014 to Project Legerra

 160 Feb 11, 2020
Reply by Dave Adams

"ooooh you rotter that was a bit harsh...;-)"

Dave Adams replied Sep 9, 2014 to Project Legerra

 160 Feb 11, 2020
Reply by Dave Adams

RSS

About

Tim Walker (The Bodger) created this Ning Network.
Create a Ning Network! »

© 2026   Created by Tim Walker (The Bodger).   Powered by

Report an Issue  |  Terms of Service