111116_Sturzeinstellung7

Add a Comment

Comment by Paul Sheridan on November 20, 2011 at 10:17

I looked at the Tiger ones, they are £56.70 each plus £19.00 for the top ball joint.  I decided to modify a pair of Spitfire ones that I got from ebay. by welding a shaped steel plate in the centre of each arm, this also has the threaded collar for the ball joint welded onto it.  Just don't seem to have a lot of spare time to work on it at the moment :-(  I will post some pics when they are finished. 

Comment by Dave Adams on November 20, 2011 at 8:33

the new tiger"6" is on triumph front suspension and it uses in-house fabricayed wishbones with adjustable camber on the top wish bone.....they may sell you some.

Comment by Tom Ger_Phaeton S2 on November 19, 2011 at 13:35

On my frame, the lower wishbone close fitting.

The picture show you, an intermediate piece. But that's now expanded.

With this new version you can view the upper and lower wishbone perfectly aligned to the frame geometry.

Tom

Comment by Tom Ger_Phaeton S2 on November 18, 2011 at 23:02

Hi Stephen,
The bottom mounts are located directly on the frame. There is no place for unications. The upper wishbone must be adjusted to the outside.

Today my friend Wolfgang and I adjusting the camber. Everything fits perfectly.