Tags:
Including the transponder & code?!
If I wanted the three button key........didn't see the point so I just got key with code chip for the pats system.
I shall have to find an asda near me.
Timpson
Big country wide franchise.....
Ah thanks
There's all kinds of stuff about PATS keys on the web, but it all seems to require 2 keys and a bunch of on/off stuff on the car. So does this mean he cloned the original key chip rather than creating a new one?
Sounds like you have built the PATS sensor into the column like it supposed to be on a Mondeo - very neat. I worry about mine getting hotwired so I have a hidden battery isolator switch that I use as well - but that's a bit clunky and prevents the remote locking from working (on the Eagle RV that is!)
The bunch of on/off of the ignition is for reprogramming remote locking to a key
I have used the pats system from the focus 60 pin ecu the things on the net are about reprogramming the keys when your locks and alarm go out of sync. I only need the immobiliser to disarm. For that all I need is the chip to be recognised by the ecu.
interesting fault on my car.....the head lights are coming on when the car is running. but will go off if i switch the lights on and off again.....but only for a short while then they come on again...the main beam also comes on by its self when the lights are on.....odd i need to think what the issue is. i suspect at the moment it might be the dip/main steering column switch.
but only the head lights not the dash lights or tail lights......
Sides tail and dash are normally all the same circuit but dip and main are separate.
Yep sounds like s dodgy switch or wiring to me. What column do you have? (I've had related problems with Sierraswitches)
Did the donor car have automatic lights? could be missing a light dependant switch somewhere.
© 2024 Created by Tim Walker (The Bodger). Powered by