DuttonOwners

Dutton Kit Cars and their owners

Mark Bagnall's Discussions (118)

Discussions Replied To (87) Replies Latest Activity

"Thanks Adrian, I'll check the threads. The rear are on 1" spacers, which is why they…"

Mark Bagnall replied Sep 22, 2014 to Running rebuild

48 Sep 29, 2014
Reply by Mark Bagnall

"NUTS I took a wheel off and this is a typical nut.  The polished ring is where the t…"

Mark Bagnall replied Sep 22, 2014 to Running rebuild

48 Sep 29, 2014
Reply by Mark Bagnall

"As bought, the oil catch tank was a squash bottle fed, through holes, by heater hose…"

Mark Bagnall replied Sep 14, 2014 to Running rebuild

48 Sep 29, 2014
Reply by Mark Bagnall

"Thanks James. Not quite so good up close but not a bad paint job. The inside needs t…"

Mark Bagnall replied Sep 14, 2014 to Running rebuild

48 Sep 29, 2014
Reply by Mark Bagnall

"Dave, I agree about the radiator. I am pondering which would be easiest, add to the…"

Mark Bagnall replied Sep 14, 2014 to Running rebuild

48 Sep 29, 2014
Reply by Mark Bagnall

"Oh yes. I had to make a quick run to the local car parts/accessory shop before they…"

Mark Bagnall replied Sep 13, 2014 to Running rebuild

48 Sep 29, 2014
Reply by Mark Bagnall

"Thanks"

Mark Bagnall replied Sep 8, 2014 to Crossflow Dipstick

23 Sep 9, 2014
Reply by Dave Adams

"Martin, it's 1600 (I believe taken out to 1700) , the 1300 might work with re-calibr…"

Mark Bagnall replied Sep 8, 2014 to Crossflow Dipstick

23 Sep 9, 2014
Reply by Dave Adams

"Hi Adrian, sounds good - just need 2 things - find a CLEAN tray then find out the oi…"

Mark Bagnall replied Sep 8, 2014 to Crossflow Dipstick

23 Sep 9, 2014
Reply by Dave Adams

"Dave, I had seen the Burton one but I do have a hose rather than a short pipe.  I mi…"

Mark Bagnall replied Sep 8, 2014 to Crossflow Dipstick

23 Sep 9, 2014
Reply by Dave Adams

RSS

© 2024   Created by Tim Walker (The Bodger).   Powered by

Report an Issue  |  Terms of Service