DuttonOwners

Dutton Kit Cars and their owners

I'm slowly getting the front end to offer the zetec & type 9 up for mounting bracket design. Suspension done and I have made new mounts for the radiator in front of the chassis rail for more room to put an air filter..

Views: 475

Reply to This

Replies to This Discussion

Thanks Daryl,

Next job is to re-engineer the gearbox to chassis mount and get some strength back in the chassis where the previous owner has just cut away tubing. Then I can drop the body back down off the 4" separation blocks I have wedged in.

nice hybrid set up I have not seen before. Good work

Your uppers are indeed triumph and that is a combination i've not seen before. Most later ones use the dutton upper wishbones.

Good job, looking tidy.

RSS

© 2024   Created by Tim Walker (The Bodger).   Powered by

Report an Issue  |  Terms of Service