Dutton Kit Cars and their owners
whats this in my ginnel
just found this in my ginnel behind my melos. i think someone has droped in their with a chopper :-)
- Attachments:
-
-
SAM_1272.JPG, 1 MB -
SAM_1273.JPG, 1 MB
-
SAM_1276.JPG, 1 MB
-
Replies to This Discussion
-
Permalink Reply by Brian (up north) Morris on
-
lol im a handyman. decorator . joiner. gardener. i fix just about anything. :-)
-
-
-
lol im going for a sierra landy crossover :-)
-
-
got some rollers :-))))
-
-
im all three daryl. well lets face it joinery aint that hard is it....mmm :-)
-
-
now my mate is a carpenter ,,,,as i think you are arnt you. hes amasing. some of the stuff hes made, well i would not know where to start.
-
-
colmum raised. yey now i can raise my clutch up without hitting the steering wheel. much better, removed scabby plate. and glassed all the holes//slots :-) very warm sitting behind a sun filled windscreen all day..:-)
-
-
hi chaps. so i removed all the fake leather badly fitted from the dash, only to find a new problem. whoever fitted it scoured all the dash first. to88a. its too curvy for me to recover it in leather. so im looking for ideas...anyone got any sugestions please.
-
-
lol
-
-
hi chaps anyone know how the bull bar fits to the chassis on a sierra... ta
-
-
good stuff. nice and east then
-
-
most things :-)
-
Permalink Reply by Adrian Southgate on
-
4 x M12 through those end plates...
It would help to post a picture of the bull bar as it may be from an S2 or S3 in which case the brackets may not be fitted to your chassis.
I'll go take piccies of mine in a bit. (BULL BAR)
About
© 2024 Created by Tim Walker (The Bodger).
Powered by
