DuttonOwners

Dutton Kit Cars and their owners

Hi all. got a ford based jc midge,and want to fit triumph bolt on wires. Is there an adaptor that I can fix to the ford hub to accept triumph wheel hole positions. sorry for ignorance,all assistance welcome john

Views: 60

Reply to This

Replies to This Discussion

Are the wires knock on? you should be able to get the knock on splined hub that fits the Ford wheel pattern and the right spline for the wheels

Hi John, seems to be non existent, however nothing is impossible. A good engineering shop should be able to knock up 4 flanges to suit. I'll ask on the Triumph forum later, plan B would be to redrill the wheels to the right PCD. Probably quicker and cheaper. Regards Steve.

seen i dutton with wires on recently....cant think where it was.....brain dead 

The Malaga on ebay had wire wheels..

RSS

© 2024   Created by Tim Walker (The Bodger).   Powered by

Report an Issue  |  Terms of Service