Wiring help required.

[Paul Sheridan]

Why is it you can spend so much time on something so simple ?????? AHHHHHRRRRRR

I have a Mini wiper stalk, and can not find the correct wiring diagram for it. 

It is a two speed stalk with a flick switch down for one wipe, and a screen was push button.

Wire colours and what they do, well most of em!

1 Light green    (12v feed)

2 Red/Green     (position 1 slow Speed) (also flick switch)

3 Blue/Green    (position 2 fast speed)

4 Green/Black  (push button takes 12 v from Light/Green for screen wash)

5 Brown/Green  (when switch in off position is joined to Red/Green other wise not joined to anything ???????? )  

Any ideas what the Brown/Green is for chaps?  Does any one have a diagram for this switch?

 

 

 

 

[Dave Adams]

found this on another forum site....

Yes, it is a mini wiper
It should say 14W somewhere on it, meaning it has the self-park feature that you'll need
Yes, it's normal for the gearboxes to spin on the shaft
Wiring as you look at the pins...
Top centre earth (usually Brown)
Upper left slow speed (red)
Lower left high speed (green)
Upper right parking brake (brown/white)
Lower right parking supply (black/purple)

You'll need a semicircular strap to mount it, with a rubber piece between that & the wiper body. Also a rubber pad between the wiper body & the bulkhead.

You may also want to change the blade parking position from driver's side to pass side or vice versa.
Also, you'll probably have to shorten the arms, blades, & the distance between the spindle centres.