Dutton Kit Cars and their owners
Anti roll bar brackets
A few duttons I have came with a plate between the chassis and arb bush and some haven't. I have put the plate in and it compresses the bush a lot more now and turning is more positive.
You can see how one of the brackets holes have elongated without the plate fitted although it was done up tight.
Albums: Legerra 2
Add a Comment
-
Comment by Steve Kerswell on October 20, 2015 at 12:33
-
Been digging down at my other compound and found that the 3 litre Capri and the 1600e has those pieces fitted as standard. Couldn't get them off today, but once I get to breaking them I will save them. I have also looked under my Sierra and slotted in this piece of 5mm. flat. Will see how it compares tomorrow when I take it out again.
-
Comment by Adrian Southgate on October 19, 2015 at 23:09
-
I'd be sure they were made after, never seen these on any other dutton.
-
Comment by Nick carlin on October 19, 2015 at 23:04
-
The plates I put on have been recessed to account for the weld and shaped to take the arb bush on the other side. Not sure if it was a dutton part or purpose made.
I found my black s3 wondering until I fitted these alot more positive now.
-
-
funny enough, that little 1300 is a screamer. I would love it in a small Locost or B type.
-
-
I thought it was the crossflow power, twisting things out of shape as the red line approached :-))))
-
-
My poly bushes are squashed of shape. Noticed that the studs welded to the chassis have monster weld, so I may just make a spacer, mine looks like I need 5mm. plate shoved in there to miss/clear the weld, wonder if this has been this strange loose effect I get on the steering. It all feels tight, but under movement something has always felt wrong.
-
-
That's an interesting find, my Sierra has not got them, it will soon :-)
- ‹ Previous
- 1
- 2
- 3
- 4
- Next ›
About
© 2024 Created by Tim Walker (The Bodger).
Powered by
You need to be a member of DuttonOwners to add comments!
Join DuttonOwners