Just managed a couple of hours in the workshop. Been meaning to get the corner weights measured for a while, so have had a bit of time to thing about how to do it without handing over the car to a competition prep company or shelling out a fortune for proper corner weight scales. So... The Kemp Method. You will need:
8 pieces of 30mm thick decking board, cut to 320mm long. 4 need bevelled edges.
1 Salter Max Bathroom scale, rated to 250kg, or equivalent.…
ContinueAdded by Roy Kemp on August 8, 2017 at 23:20 — 15 Comments
Unfortunately, not too much to report.
Steve's had her out again, another demo run at the Alford Speedfest and one Autotest, but I've still only managed one so far this year. Been so busy it's been a total bust, fun wise.
Anyway, in terms of upgrades, about the only thing we've done is get the Peugeot 205GTi 1900 15" alloys fitted to the rear. Needed 20mm spacers, although I reckon 15mm worth might have done. Also discovered the car was already fitted with the…
ContinueAdded by Roy Kemp on August 4, 2017 at 21:31 — 2 Comments
© 2024 Created by Tim Walker (The Bodger). Powered by