does any body on hear know the blue leggera on ebay I am considering a bid, independent info would be usefull Thanks
Add a Comment
oh and the number plate lights really need to go into the bootlid like all the cool legerras...
Its a series 1 legerra as denoted by the lack of rear bumper vents, filler cap that sits on top of the rear wing instead of being frenched in and the lack of two bonnet vents at each rear extremity of the bonnet. Mine is a series 2 if you want to do a comparison.
It looks to be sitting very low with a lot of negative camber on the front and having the back axle that low can only lead to complications with bump stops, propshaft clearance etc. If they are non adjustables I reckon you'd have to replace the springs and / or shocks. The wheels are from a FWD ford and will be held by 24mm or bigger spacers unless its been extensively modified. This one may have the older chassis with phaeton / melos style lower shock mounts instead of mounts on the upper wishbone like the S2.
One of the only examples I have seen to use the original Legerra dash assembly, of two tissue boxes and a cornflakes packet (the centre box is like a cornflakes packet and the pods either side are like tissue boxes.) Body looks tidy but i'd check the door shuts arent scraped by the door locks (caused by bowing chassis rails under load) Hard top looks good (James would buy that off you ... sorry james) Hope all that helps, any info I have on the database will follow by PM as I won't publish it on an open forum.
© 2024 Created by Tim Walker (The Bodger). Powered by
You need to be a member of DuttonOwners to add comments!
Join DuttonOwners