DuttonOwners

Dutton Kit Cars and their owners

Dave Adams's Discussions (1,878)

Search Forum

View

Discussions Replied To (1795) Replies Latest Activity

"me i have been planning the next project, and i am undecided what to do with my car…"

Dave Adams replied May 28, 2013 to Where is every body ??

 29 May 29, 2013

"I use the aldi 150A mig welder. its built (rebuilt my S1) twice. i have had no probl…"

Dave Adams replied May 24, 2013 to Welding equipment

 6 May 24, 2013
Reply by Dave Taylor

"I would gladly come to an arrangement over the ( lancia/fiat ) box. i could even chu…"

Dave Adams replied May 23, 2013 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

"Which is why it was corrected out when i rebuilt it last year."

Dave Adams replied May 23, 2013 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

"I think its because a slight angle causes the bearings to rotate and thus even out t…"

Dave Adams replied May 23, 2013 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

"The trouble with my axle and the diff looking up is that amy movement of the axle ma…"

Dave Adams replied May 22, 2013 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

"Yeah i knew there should be some angle perhaps i should have said the same or simila…"

Dave Adams replied May 22, 2013 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

"Good job mines the 1800 ;-)"

Dave Adams replied May 22, 2013 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

"The problem with the mondeo gearbox is ifs a FWD box and i need a RWD box."

Dave Adams replied May 22, 2013 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

"The diff angle........basically the input angle should mirror the output angle. also…"

Dave Adams replied May 22, 2013 to S1 Rebuild(s)

 1371 Jun 19, 2017
Reply by Dave Adams

RSS

About

Tim Walker (The Bodger) created this Ning Network.
Create a Ning Network! »

© 2025   Created by Tim Walker (The Bodger).   Powered by

Report an Issue  |  Terms of Service