DuttonOwners

Dutton Kit Cars and their owners

Dave Adams's Discussions (1,878)

Discussions Replied To (1795) Replies Latest Activity

"the drivers side welding.... it should be better welded when i am finished.........b…"

Dave Adams replied Sep 21, 2014 to Project Legerra

160 Feb 11, 2020
Reply by Dave Adams

"I was asked to do a bit of welding for a neighbour recently on a gate post to create…"

Dave Adams replied Sep 21, 2014 to Project Legerra

160 Feb 11, 2020
Reply by Dave Adams

"take a look at my S1 rebuild thread its a bit long at over 40 pages i think, but it…"

Dave Adams replied Sep 14, 2014 to Phaeton S1 project - for sale

41 Sep 14, 2014
Reply by Dave Adams

"well after a week of holiday in which i have mostly been replacing a wall and door o…"

Dave Adams replied Sep 14, 2014 to Project Legerra

160 Feb 11, 2020
Reply by Dave Adams

"good to see it go to a good home scot....if you need advise on the build i have done…"

Dave Adams replied Sep 14, 2014 to Phaeton S1 project - for sale

41 Sep 14, 2014
Reply by Dave Adams

"cooling on Duttons is often very poor due to the location of the radiators and the l…"

Dave Adams replied Sep 14, 2014 to Running rebuild

48 Sep 29, 2014
Reply by Mark Bagnall

"there are a number of steel stockholders near me they tend to be a lot cheaper than…"

Dave Adams replied Sep 11, 2014 to Project Legerra

160 Feb 11, 2020
Reply by Dave Adams

"it does show that the extra cost and weight of 3 mm wall thickness over 1.6 mm is no…"

Dave Adams replied Sep 11, 2014 to Project Legerra

160 Feb 11, 2020
Reply by Dave Adams

"the problem i have with large spacers is the weight especially on the front. (the sp…"

Dave Adams replied Sep 11, 2014 to Pete's S4

144 Sep 8, 2015
Reply by Pete Clayton

"the point where the chassis rail strengthening turns to follow the original chassis…"

Dave Adams replied Sep 10, 2014 to Project Legerra

160 Feb 11, 2020
Reply by Dave Adams

RSS

© 2025   Created by Tim Walker (The Bodger).   Powered by

Report an Issue  |  Terms of Service