DuttonOwners

Dutton Kit Cars and their owners

Dave Adams's Discussions (1,878)

Search Forum

View

Discussions Replied To (1795) Replies Latest Activity

"the steel used for the strengthening is a little over engineered with 3 mm thick wal…"

Dave Adams replied Sep 10, 2014 to Project Legerra

 160 Feb 11, 2020
Reply by Dave Adams

"the wheels look fine, the 1" spacers seem quite big but i have seen thicker on some…"

Dave Adams replied Sep 10, 2014 to Pete's S4

 144 Sep 8, 2015
Reply by Pete Clayton

"Thats what I am hoping. ......whats there was decoration only it's had no practical…"

Dave Adams replied Sep 9, 2014 to Project Legerra

 160 Feb 11, 2020
Reply by Dave Adams

"ooooh you rotter that was a bit harsh...;-)"

Dave Adams replied Sep 9, 2014 to Project Legerra

 160 Feb 11, 2020
Reply by Dave Adams

"from what i gather the chassis and body were made by the dutton factory after Scorhi…"

Dave Adams replied Sep 9, 2014 to Project Legerra

 160 Feb 11, 2020
Reply by Dave Adams

"I decided to sort the chassis strengthening on my car.....i knew that it looked a bi…"

Dave Adams replied Sep 9, 2014 to Project Legerra

 160 Feb 11, 2020
Reply by Dave Adams

"when one of my engines had no dip stick i drained the oil and refilled with fresh us…"

Dave Adams replied Sep 9, 2014 to Crossflow Dipstick

 23 Sep 9, 2014
Reply by Dave Adams

"they rot......almost anywhere and nowhere. it depends what has been done to it in th…"

Dave Adams replied Sep 7, 2014 to First place that needs repairing on chassis

 12 Sep 8, 2014

"some mk2 struts here if anyone looking for some.... escort struts"

Dave Adams replied Sep 7, 2014 to Ebay cars and interesting bits

 6 Sep 7, 2014
Reply by Dave Adams

"to correct the difference between the camber on the N/S to the off side i have been…"

Dave Adams replied Sep 7, 2014 to Project Legerra

 160 Feb 11, 2020
Reply by Dave Adams

RSS

About

Tim Walker (The Bodger) created this Ning Network.
Create a Ning Network! »

© 2025   Created by Tim Walker (The Bodger).   Powered by

Report an Issue  |  Terms of Service