DuttonOwners

Dutton Kit Cars and their owners

Roy Kemp's Blog – December 2016 Archive (3)

More progress... 2/2

Two drop link bars at an angle (tacked on for now) meet the Corsa C column mounting points.We'll see how this goes dealing with the torque reaction forces. If it's a bit wobbly, we'll think about adding some more. Wooden supports will shortly…

Continue

Added by Roy Kemp on December 23, 2016 at 20:03 — 5 Comments

More progress... 1/2

Just a few photos of where we're at with the Phaeton upgrades....

Adjustable bottom arms, all modded with brackets and looking saucy. Unfortunately, however, the rose joint inner races are 1/2" and the existing bolts are 7/16", so I need to drill out the bolt holes and fit 1/2" bolts.…

Continue

Added by Roy Kemp on December 23, 2016 at 19:51 — No Comments

Progress - TCAs, power steering, etc

Evening all,

First up, I just wanted to say a big thanks to all of you that commented on my previous blog entry and forum post on ARB relocation. Didn't even know what a caster angle was before all that. I'm still bloody clueless, but now at least I'm aware of more things that I'm ignorant of, and need to be aware of. Always a good first step!

So, popped round to see how my fabricator chum is getting on with the various bits on the Phaeton. The adjustable TCAs…

Continue

Added by Roy Kemp on December 9, 2016 at 19:07 — 5 Comments

© 2022   Created by Tim Walker (The Bodger).   Powered by

Report an Issue  |  Terms of Service