So the saga of the gearbox rear seal continues. When it had the rear crank seal done the garage also fitted a prop/tailshaft seal which promptly leaked just as badly as the one they took out.
When I had the horrible vibration issue it was coming from the prop not fitting into the gearbox. Thinking this might have damaged the bush inside the tailshaft and caused the leak I ordered a new one and another seal. Now if anyone tells you this is a DIY job DON'T believe a word of it. Getting the seal out is an easy one with a modified puller, getting down the side of the tailshaft past the bush is bloody impossible without the right tool. According to the haynes manual for the Ford Sierra its a ford dealer job...I now agree. As it was needed for work tomorrow the new seal went in without changing the bush, a right pain in the arse.
Add a Comment
That would be the ideal situation but with the price of new legs being more than I paid for the car its a bloody joke.
On the bright side at least I made it back to the unit without it collapsing.
I'll look into alternatives tomorrow but I do have to take CMV back to the unit for some fettling this afternoon.
OMG. You might want to do both, perhaps?
Bit of an Oops, thats oops with a capital O...
Set off round to the unit this morning and after driving about half a mile down to the local Spar for cow juice I could smell rubber burning. Note to self, check under bonnet for hose contact with manifold when I get to the unit.
Arrived at unit, got out and thought that wheel looks a bit cambered...
So I poked the camera under and found a bit of a problem with the strut...
So.... anyone got a spare standard offside mk2 strut ?
This one is fooked...
My mate here reckons 12 months ticket is worth about £500 nowadays. He buys and sells bangers. Mainly mondeo and focus stuff.
Now I can attempt to refit all the err dodgy bits...
Oh, top marks Ade. :-))
Good news. The Beast of Blackrod just sailed through another MOT, no advisories.
i speak to andy on a regular basis, he dont have full admin rights unfortunately...... ;-)
Dave, try contacting Andy Smith, he is still an administrator on G's. He may be able to sort it.
© 2024 Created by Tim Walker (The Bodger). Powered by
You need to be a member of DuttonOwners to add comments!
Join DuttonOwners